Keranjang Belanja Anda kosong!
Senin-Jumat : 09.00 - 18.00 , Sabtu : 09.00 - 15.00 wib 
-
BELANJA AMAN
TOKO RESMI BARANG ORIGINAL DAN BERGARANSI
-
PELAYANAN CEPAT
1 JAM TERKIRIM *
-
HUBUNGI KAMI
021-6501012 / 65306112
-
ALAMAT
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
Keranjang Belanja
0 item(s) - Rp.0,00
Yamaha
Yamaha DZR315D 2000W 3 Way Powered Speaker with Dante
Rp.26.850.000,00
Tersedia
Spesifikasi Yamaha DZR315D 2000W 3 Way Powered Speaker with Dante
Yamaha DZR315D 2000W 3 Way Powered Speaker with Dante
Power, Performance, and Easy System Integration
The Yamaha DZR315-D offers superb clarity and best-in-class SPL performance. This 3-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier and a 31Hz–20kHz frequency range, and it can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. Built-in Dante capabilities enable smart system integration with Yamaha consoles and other Dante devices. The DZR315-D also operates effectively as a stage monitor. The DZR315-D employs a lightweight yet durable plywood cabinet with a premium-grade polyurea coating.
Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR315-D to its highest output level. D-Contour features two settings, FOH/Main and Monitor mode, allowing you to fine-tune the DZR315-D's sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR315-D remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR315-D is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its mid-frequency transducer features an 8-inch cone and 1.5-inch voice coil, yielding maximum efficiency and super-low distortion for low-mid frequencies. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful yet lightweight neodymium magnet to handle the chest-thumping low end that the DZR315-D delivers. The DZR315-D isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
Built-in Dante capabilities
Integrating the DZR315-D with Yamaha consoles and other Dante devices is a breeze. The DZR315-D features a built-in 2-in/2-out Dante interface, along with sample rate conversion, allowing 48kHz device compatibility. Benefit from simplified patching with Yamaha's CL/QL digital consoles from their I/O device display, while TF console users can select Quick Config for fast, easy setup.
You can also combine the DZR315-D's Analog I/O with Dante I/O, supplying you with flexible routing and system configuration. Or use the Dante break-In and break-Out function to act as a simple I/O box. Beyond that, Yamaha’s ProVisionare Control software for Windows and ProVisionare Touch for iPad are also Dante compatible, giving you added remote management of your system.
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the Yamaha DZR315-D is a beast. It delivers an impressive 143dB SPL, so go ahead and crank it up — the DZR315-D can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching-mode power supply. Beyond that, this amp was optimized to match the DZR315-D's transducers, ensuring top-tier sound quality.
Features:
- 3-way powered loudspeaker with 2" HF, 8" MF, and 15" LF drivers
- Boasts a high-power 2,000-watt Class D amplifier and 31Hz–20kHz frequency range
- Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
- D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
- FOH/Main and Monitor modes allow you to fine-tune your sound based on your application
- DSP protection safeguards your power supply, power amplifiers, and transducers against damage
- Optimized factory presets and intuitive LCD screen make operation easy
- Built-in 2-in/2-out Dante interface enables smart system integration with Yamaha consoles and other Dante devices
- Great-sounding, custom-designed transducers
- Universal switching-mode power supply offers maximum power, along with stable, worry-free operation
- Lightweight yet durable plywood cabinet with a premium-grade polyurea coating
- Includes multiple integrated M10 rigging points for suspended applications
Specs
- Powered: Yes
- Power Configuration: Bi-amped
- Channels: 2
- LF Driver Size: 15" cone
- Mid Driver Size: 8" cone
- HF Driver Size: 1" throat compression driver
- LF Driver Power Amp: 1000W Class D Peak
- Total Power: 2000W Class D Peak
- Inputs: 2 x XLR-1/4" combo
- Outputs: 2 x XLR
- USB: 1 x Type A
- Other I/O: 2 x EtherCON (Dante)
- Frequency Range: 31Hz-20khz (-10 dB)
- Crossover Frequency: 700Hz, 2500Hz
- Maximum Peak SPL: 143dB SPL @ 1m
- Horizontal Coverage Angle: 75 Degrees
- Vertical Coverage Angle: 50 Degrees
- Signal Processing: EQ, Delay
- Enclosure Material: Plywood
- Mounting Options: 16 x M10 Fly Points
- Power Source: Standard IEC AC cable
- Height: 35.3"
- Width: 21.6"
- Depth: 20.5"
- Weight: 91.7 lbs/42 kgs
Yamaha DZR315D 2000W 3 Way Powered Speaker with Dante
Harga:
Rp.33.600.000,00 Rp.26.850.000,00
Spesifikasi Yamaha DZR315D 2000W 3 Way Powered Speaker with Dante
Yamaha DZR315D 2000W 3 Way Powered Speaker with Dante
Power, Performance, and Easy System Integration
The Yamaha DZR315-D offers superb clarity and best-in-class SPL performance. This 3-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier and a 31Hz–20kHz frequency range, and it can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. Built-in Dante capabilities enable smart system integration with Yamaha consoles and other Dante devices. The DZR315-D also operates effectively as a stage monitor. The DZR315-D employs a lightweight yet durable plywood cabinet with a premium-grade polyurea coating.
Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR315-D to its highest output level. D-Contour features two settings, FOH/Main and Monitor mode, allowing you to fine-tune the DZR315-D's sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR315-D remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR315-D is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its mid-frequency transducer features an 8-inch cone and 1.5-inch voice coil, yielding maximum efficiency and super-low distortion for low-mid frequencies. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful yet lightweight neodymium magnet to handle the chest-thumping low end that the DZR315-D delivers. The DZR315-D isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
Built-in Dante capabilities
Integrating the DZR315-D with Yamaha consoles and other Dante devices is a breeze. The DZR315-D features a built-in 2-in/2-out Dante interface, along with sample rate conversion, allowing 48kHz device compatibility. Benefit from simplified patching with Yamaha's CL/QL digital consoles from their I/O device display, while TF console users can select Quick Config for fast, easy setup.
You can also combine the DZR315-D's Analog I/O with Dante I/O, supplying you with flexible routing and system configuration. Or use the Dante break-In and break-Out function to act as a simple I/O box. Beyond that, Yamaha’s ProVisionare Control software for Windows and ProVisionare Touch for iPad are also Dante compatible, giving you added remote management of your system.
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the Yamaha DZR315-D is a beast. It delivers an impressive 143dB SPL, so go ahead and crank it up — the DZR315-D can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching-mode power supply. Beyond that, this amp was optimized to match the DZR315-D's transducers, ensuring top-tier sound quality.
Features:
- 3-way powered loudspeaker with 2" HF, 8" MF, and 15" LF drivers
- Boasts a high-power 2,000-watt Class D amplifier and 31Hz–20kHz frequency range
- Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
- D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
- FOH/Main and Monitor modes allow you to fine-tune your sound based on your application
- DSP protection safeguards your power supply, power amplifiers, and transducers against damage
- Optimized factory presets and intuitive LCD screen make operation easy
- Built-in 2-in/2-out Dante interface enables smart system integration with Yamaha consoles and other Dante devices
- Great-sounding, custom-designed transducers
- Universal switching-mode power supply offers maximum power, along with stable, worry-free operation
- Lightweight yet durable plywood cabinet with a premium-grade polyurea coating
- Includes multiple integrated M10 rigging points for suspended applications
Specs
- Powered: Yes
- Power Configuration: Bi-amped
- Channels: 2
- LF Driver Size: 15" cone
- Mid Driver Size: 8" cone
- HF Driver Size: 1" throat compression driver
- LF Driver Power Amp: 1000W Class D Peak
- Total Power: 2000W Class D Peak
- Inputs: 2 x XLR-1/4" combo
- Outputs: 2 x XLR
- USB: 1 x Type A
- Other I/O: 2 x EtherCON (Dante)
- Frequency Range: 31Hz-20khz (-10 dB)
- Crossover Frequency: 700Hz, 2500Hz
- Maximum Peak SPL: 143dB SPL @ 1m
- Horizontal Coverage Angle: 75 Degrees
- Vertical Coverage Angle: 50 Degrees
- Signal Processing: EQ, Delay
- Enclosure Material: Plywood
- Mounting Options: 16 x M10 Fly Points
- Power Source: Standard IEC AC cable
- Height: 35.3"
- Width: 21.6"
- Depth: 20.5"
- Weight: 91.7 lbs/42 kgs
Tulis review
Nama Anda:Review Anda:
Note: HTML tidak diterjemahkan!
Rating: Jelek Bagus
Masukkan kode verifikasi berikut:
(Toko RESMI hanya di SUNTER Jakut.tidak buka di tempat Lain) Jl.Sunter Mas Barat 1 Blok H9 No.4 Jakarta utara.Jika Pakai Waze atau Google maps ketik : Galeri Musik Indonesia.com 
(+62) 021 - 6501012, 6502113, 65306112 