Keranjang Belanja Anda kosong!
Senin-Jumat : 09.00 - 18.00 , Sabtu : 09.00 - 15.00 wib 
-
BELANJA AMAN
TOKO RESMI BARANG ORIGINAL DAN BERGARANSI
-
PELAYANAN CEPAT
1 JAM TERKIRIM *
-
HUBUNGI KAMI
021-6501012 / 65306112
-
ALAMAT
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
Keranjang Belanja
0 item(s) - Rp.0,00
Rcf
RCF SUB 9004 AS Active High Power Subwoofer
Spesifikasi RCF SUB 9004 AS Active High Power Subwoofer
RCF SUB 9004 AS Active High Power Subwoofer
The SUB 9004-AS is a single 18” high power active subwoofer. It employs a state of the art transducer featuring a hypervented high power neodymium magnetic circuit with 4” voice coil. The extremely high power amplifier is a new design that delivers extended low frequency performance. Due to its rugged construction it is perfect for AV rental inventories.
RCF RDNet
NETWORKED CONTROL AND MUCH MORE
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.
TOP END ELECTRONICS
The amplifier integrates a low-noise 32-bit DSP circuit, controlled through the RCF proprietary RDNet network to easily handle the soft clipping limiters, RMS limits, polarity, amplitude, timing and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay and presets selection. The regulated power supply guarantees full power from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating aluminium panel for extra protection during transportation.
HYPER VENTILATION SYSTEM
RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. The 4.0" inside/outside voice coil is wounded on a strong fibreglass former and guarantees a more efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed the unique Hyper Ventilation system with very low power compression. The cone is water resistant.
CABINET
The cabinet is made of high-quality birch plywood with weatherproof treatment. The subs are stackable and lightweight, for an easy set-up and tear down. A pole receptacle on the top and side allows the woofer to be used in various configurations. The heavy-duty coating and the rugged structure of the cabinet withstand long-term use and transportation and the separate housing for the amplifier guarantees component efficiency and reliability. Transportation is fast thanks to the detachable Kart kit, a dolly caster-board with rugged tour grade casters and rotating cam mechanism.
Features
2800 W power rating
136 dB SPL Max
30 - 400 Hz Frequency Range
1 x 18" Hyper Ventilation Neodymium Subwoofer
DSP Controlled Input Section with selectable presets
RDNet remote monitoring and control
Delay Control
Baltic Birch Cabinet
Specifications
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver 1 x 18" / 457.2 mm Woofer
LF Voice Coil 4" / 101.6 mm
Magnet Neodymium
Performance
Frequency Response 30 Hz to 400 Hz
Maximum SPL 136 dB
Input Sensitivity +4 dBu
Protections RMS, Thermal
Connectivity
Audio I/O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I/O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling Forced
Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.6 x 22 x 27.6" / 700 x 558 x 700 mm
Weight
125.7 lb / 57 kg
Rp.62.950.000,00
Tersedia
RCF SUB 9004 AS Active High Power Subwoofer
Harga:
Rp.62.950.000,00
Spesifikasi RCF SUB 9004 AS Active High Power Subwoofer
RCF SUB 9004 AS Active High Power Subwoofer
The SUB 9004-AS is a single 18” high power active subwoofer. It employs a state of the art transducer featuring a hypervented high power neodymium magnetic circuit with 4” voice coil. The extremely high power amplifier is a new design that delivers extended low frequency performance. Due to its rugged construction it is perfect for AV rental inventories.
RCF RDNet
NETWORKED CONTROL AND MUCH MORE
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.
TOP END ELECTRONICS
The amplifier integrates a low-noise 32-bit DSP circuit, controlled through the RCF proprietary RDNet network to easily handle the soft clipping limiters, RMS limits, polarity, amplitude, timing and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay and presets selection. The regulated power supply guarantees full power from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating aluminium panel for extra protection during transportation.
HYPER VENTILATION SYSTEM
RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. The 4.0" inside/outside voice coil is wounded on a strong fibreglass former and guarantees a more efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed the unique Hyper Ventilation system with very low power compression. The cone is water resistant.
CABINET
The cabinet is made of high-quality birch plywood with weatherproof treatment. The subs are stackable and lightweight, for an easy set-up and tear down. A pole receptacle on the top and side allows the woofer to be used in various configurations. The heavy-duty coating and the rugged structure of the cabinet withstand long-term use and transportation and the separate housing for the amplifier guarantees component efficiency and reliability. Transportation is fast thanks to the detachable Kart kit, a dolly caster-board with rugged tour grade casters and rotating cam mechanism.
Features
2800 W power rating
136 dB SPL Max
30 - 400 Hz Frequency Range
1 x 18" Hyper Ventilation Neodymium Subwoofer
DSP Controlled Input Section with selectable presets
RDNet remote monitoring and control
Delay Control
Baltic Birch Cabinet
Specifications
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver 1 x 18" / 457.2 mm Woofer
LF Voice Coil 4" / 101.6 mm
Magnet Neodymium
Performance
Frequency Response 30 Hz to 400 Hz
Maximum SPL 136 dB
Input Sensitivity +4 dBu
Protections RMS, Thermal
Connectivity
Audio I/O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I/O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling Forced
Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.6 x 22 x 27.6" / 700 x 558 x 700 mm
Weight
125.7 lb / 57 kg
Tulis review
Nama Anda:Review Anda:
Note: HTML tidak diterjemahkan!
Rating: Jelek Bagus
Masukkan kode verifikasi berikut:
(Toko RESMI hanya di SUNTER Jakut.tidak buka di tempat Lain) Jl.Sunter Mas Barat 1 Blok H9 No.4 Jakarta utara.Jika Pakai Waze atau Google maps ketik : Galeri Musik Indonesia.com 
(+62) 021 - 6501012, 6502113, 65306112 