TOKO RESMI BARANG ORIGINAL DAN BERGARANSI
1 JAM TERKIRIM *
021-6501012 / 65306112
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
With its custom 18" low frequency transducer and a peak SPL of 128 dB, the GT SUB 18 A active subwoofer delivers a big, tight bottom end with superb transient response. Providing amazing value, it sports a sturdy MDF bass reflex enclosure with hard-wearing textured Dura-Vinyl covering, heavy duty steel handles, a steel grille with honeycomb pattern and threaded M20 pole insert.
The GT SUB 18 A is powered by a built-in Class D amplifier with 1600 watts peak output and high-efficiency SMPS as well as overcurrent and overvoltage protection. It provides a 32 Hz - 200 Hz frequency response and features XLR and 6.3 mm line inputs, XLR line output, an adjustable low-pass filter and filtered 100 Hz satellite output.
A protective cover is available as accessory.
Spech
Product number: | LDGTSUB18A |
---|---|
Product type: | PA subwoofer |
Type: | active |
Low/mid driver dimensions: | 18" |
Low/mid driver dimensions (mm): | 457.2mm |
Woofer magnet: | Ferrite |
Woofer brand: | Custom-made |
Woofer voice coil: | 4" |
Woofer voice coil (mm): | 101.6mm |
Amplifier: | Class D |
RMS: | 400W |
Peak power: | 1600W |
Frequency response: | 32 - 200Hz |
Max. SPL (continuous): | 125dB |
Max. SPL (peak): | 128dB |
Protection circuits: | short circuit, limiter, DC, over-current |
Input impedance: | 27 kOhm(s) |
Input sensitivity: | max. 14dBu, -2dBu |
Controls: | Sub Freq (adjustable low-pass filter), sub level, Subwoofer Phase Reverse |
Indicators: | limit, Power, protect (protection circuit engaged), signal |
Line inputs: | 2 |
Line input connectors: | XLR, 6.3 mm Jack |
Line outputs: | 2 x direct output, 2 x sat output 100 Hz |
Line output connectors: | XLR |
Operating voltage: | Switching Power Supply, 100 V AC - 120 V AC, 200 V AC - 240 V AC, 50 - 60 Hz (automatic conversion) |
Cabinet material: | 18 mm MDF |
Cabinet surface: | Dura-vinyl textured paint |
Cabinet construction: | vented |
Width: | 510mm |
Height: | 680mm |
Depth: | 710mm |
Weight: | 50.3kg |
Features: | LD Systems GT handles, Threaded flange M20 |
With its custom 18" low frequency transducer and a peak SPL of 128 dB, the GT SUB 18 A active subwoofer delivers a big, tight bottom end with superb transient response. Providing amazing value, it sports a sturdy MDF bass reflex enclosure with hard-wearing textured Dura-Vinyl covering, heavy duty steel handles, a steel grille with honeycomb pattern and threaded M20 pole insert.
The GT SUB 18 A is powered by a built-in Class D amplifier with 1600 watts peak output and high-efficiency SMPS as well as overcurrent and overvoltage protection. It provides a 32 Hz - 200 Hz frequency response and features XLR and 6.3 mm line inputs, XLR line output, an adjustable low-pass filter and filtered 100 Hz satellite output.
A protective cover is available as accessory.
Spech
Product number: | LDGTSUB18A |
---|---|
Product type: | PA subwoofer |
Type: | active |
Low/mid driver dimensions: | 18" |
Low/mid driver dimensions (mm): | 457.2mm |
Woofer magnet: | Ferrite |
Woofer brand: | Custom-made |
Woofer voice coil: | 4" |
Woofer voice coil (mm): | 101.6mm |
Amplifier: | Class D |
RMS: | 400W |
Peak power: | 1600W |
Frequency response: | 32 - 200Hz |
Max. SPL (continuous): | 125dB |
Max. SPL (peak): | 128dB |
Protection circuits: | short circuit, limiter, DC, over-current |
Input impedance: | 27 kOhm(s) |
Input sensitivity: | max. 14dBu, -2dBu |
Controls: | Sub Freq (adjustable low-pass filter), sub level, Subwoofer Phase Reverse |
Indicators: | limit, Power, protect (protection circuit engaged), signal |
Line inputs: | 2 |
Line input connectors: | XLR, 6.3 mm Jack |
Line outputs: | 2 x direct output, 2 x sat output 100 Hz |
Line output connectors: | XLR |
Operating voltage: | Switching Power Supply, 100 V AC - 120 V AC, 200 V AC - 240 V AC, 50 - 60 Hz (automatic conversion) |
Cabinet material: | 18 mm MDF |
Cabinet surface: | Dura-vinyl textured paint |
Cabinet construction: | vented |
Width: | 510mm |
Height: | 680mm |
Depth: | 710mm |
Weight: | 50.3kg |
Features: | LD Systems GT handles, Threaded flange M20 |