Gibson SG Special Ebony with Case Electric Guitar

Spesifikasi Gibson SG Special Ebony with Case Electric Guitar

Gibson SG Special Ebony with Case Electric Guitar

Raw and Rockin', A '60s Icon Returns!

It's more than just a coincidence that mahogany is one of the most prized woods for electric guitar design, and the Gibson USA SG Special '60s Tribute is a classic example of the use of this fine tonewood in an instrument that's both subtle and aggressive. The thin solid-mahogany body offers a considerable reduction on weight when compared to many other solidbody electrics, while presenting a warm, rich resonance with lots of harmonic depth and sparkle. The guitar's solid mahogany neck is carved to a fast SlimTaper profile similar to SGs from the '60s, for superb in-the-hand comfort and outstanding playability, while it's glued in deep-set, long-tenon neck/body joint and 17-degree back angled headstock team up to provide a transference of neck resonance into the body that's far superior to other neck designs.

Two Gibson P-90 single-coil pickups with genuine Alnico V magnetssome of the finest reproductions of vintage P-90s currently availableyield everything from warm, vocal neck tones to plenty of bark and snarl from the bridge position, with round and funky tones in between, all at the flip of a three-way toggle switch. To enhance all this tonal splendor, a stopbar tailpiece provides a rock-solid anchor behind Gibson's legendary Tune-o-matic tailpiece, prized for its ability to enhance singing sustain while remaining highly adjustable to perfect your instrument's intonation. At the other end of the neck, a PLEK-cut Corian nut ensures superior resonance and sustain. Wrap it all in a thin nitrocellulose finish in Worn Cherry, Worn Natural, Worn White or Worn Ebony, with the smaller early '60s pickguard and pearloid dot fingerboard inlays, and it's a guitar that looks as raw and meaty as it sounds.

Features
- Solid Mahogany body with North American Rosewood fingerboard
- Available in four classic worn Finishes
- Slim, fast '60s style neck profile
- Two Gibson USA P-90 Pickups
- Vintage Kluson-Style tuners with perloid buttons

Specifications

Body
Species: Mahogany
Adhesive: Franklin Titebond 50

Neck
Species: Mahogany
Profile: 60's SlimTaper
Truss Rod: Traditional Adjustable
Joint Angle: 5 (+/- 15 seconds)
Adhesive: Franklin Titebond 50

Neck Fit
Joint: Mortise & Tenon
Adhesive: Franklin Titebond 50
Joint Angle Tolerance: +/- .005"

Fingerboard
Species: North American Rosewood
Frets: 22
Radius: 12"
Nut/E.O.B: 1.695"/2.260"
Inlays: Acrylic Dots

Nut
Material: Corian
Width: 1.695
Slots: Gibson PLEK System

Headstock
Logo: Gold "Gibson" Logo
Truss Rod Cover: Black and White Antique Bell

Tuners
Model: Vintage Kluson Style with Perloid Buttons
Plating: Nickel
Tuning Ratio: 14:1

Bridge
Type: Tune-O-Matic
Material: Zamak
Plating: Chrome

Tailpiece
Type: Stop Bar
Material: Zamak
Plating: Chrome

Hardware
Knobs: Black Top Hat
Pickguard: Solid Black '61 Style
Toggle Switch Washer: Cream with Gold Silkscreen
Control Plate Cover: Black Acrylic
Strings: .010 - .046, Genuine Gibson strings
Strap Buttons: Aluminum

Pickups
Neck Position: P-90
Bridge Position: P-90

Electronics
Potentiometers:
- 2 Volume Controls
- 2 Tone Controls
Type: 300k Linear Volume, 500k Non-linear Tone
Coil Wiring: Machine Wound
Toggle Switch: Three-way Switchcraft with Black Plastic Tip
Output Jack: Traditional 1/4"

• Manufacture : SGSP00EBCH1

Tulis review