FLAMMAFLAMMA FS22 Stereo Delay and Reverb Pedal Digital Guitar Effects Pedal
Spesifikasi FLAMMA FS22 Stereo Delay and Reverb Pedal Digital Guitar Effects Pedal
FLAMMA FS22 Stereo Delay and Reverb Pedal Digital Guitar Effects Pedal
FLAMMA FS22 EKOVERB PEDAL
The level and tone of the delay and reverb can be modified as well as the timing and feedback of the delay or the decay and pre-delay of the reverb. This lets you set the delay or reverb effect of each set to maximum volume or completely off, allowing you to only use either the delay or reverb effect.
Features
3 pairs of built-in delay & reverb effects
Dual-footswitch stereo delay & reverb effects
Individual Tap Tempo function
Freeze function for infinite trail
Digital circuit and solid design
True bypass reduce signal loss
LED incicatoer shows wroking state
Trail on function allows the effect to fade out naturally
Analog Echo Delay+Mod Reverb: Analog real echo delay combined with modulated reverb effect
Analog Delay+Shimmer Reverb: Analog delay combined with shimmer reverb effect
Choose Effects Modes
Toggle the switch to choose the 3 pairs of delay+reverb effects:
1. Reverse Delay+Swell Reverb;
2. Analog Echo Delay+Mod Reverb;
3. Analog Delay+Shimmer Reverb
Delay Controls
LEVEL: Volume leve of delay effect;
TIME: Delay time of delay effect;
TONE: Tone color of the delay effect;
FEEDBACK: Feedback of delay effect
Reverb Controls
LEVEL: Volume of reverb effect;
DECAY: Decay time of reverb effect;
TONE: Tone color of reverb effect;
PRE-DELAY: Pre-delay time.
Optional Routing
Whether you want basic mono or true stereo, you will get it from this pedal. Digital and true bypass circuit design reduces your signal loss.
Easy to Use
The delay and reverb are time-based effects. The Level, Time, Tone, Feedback controls of Delay; and the Mix, Decay, Tone, Pre-delay controls of Reverb are all knob-based, and separated, turn one of them to 0 will get another individual reverb/delay effect.
Tap Tempo
The Tap Tempo switch can be used as named or you can hold it down to access the “freeze” effect to stop time and enjoy your ambient creation. The built-in trail function also lets you set your effects to fade out naturally.
Trial On
Trail On will allow the effect to fade out naturally when it is switched off during playing. Power on the pedal, press and hold the Bypass switch to turn on/off the Trail function. When the Trail is on, the LED of Bypass switch will turn blue and blink after pressing.
Power Supply9V DC center negative (Please do not use power supply over 9V orincorrect polarity)
Spesifikasi FLAMMA FS22 Stereo Delay and Reverb Pedal Digital Guitar Effects Pedal
FLAMMA FS22 Stereo Delay and Reverb Pedal Digital Guitar Effects Pedal
FLAMMA FS22 EKOVERB PEDAL
The level and tone of the delay and reverb can be modified as well as the timing and feedback of the delay or the decay and pre-delay of the reverb. This lets you set the delay or reverb effect of each set to maximum volume or completely off, allowing you to only use either the delay or reverb effect.
Features
3 pairs of built-in delay & reverb effects
Dual-footswitch stereo delay & reverb effects
Individual Tap Tempo function
Freeze function for infinite trail
Digital circuit and solid design
True bypass reduce signal loss
LED incicatoer shows wroking state
Trail on function allows the effect to fade out naturally
Analog Echo Delay+Mod Reverb: Analog real echo delay combined with modulated reverb effect
Analog Delay+Shimmer Reverb: Analog delay combined with shimmer reverb effect
Choose Effects Modes
Toggle the switch to choose the 3 pairs of delay+reverb effects:
1. Reverse Delay+Swell Reverb;
2. Analog Echo Delay+Mod Reverb;
3. Analog Delay+Shimmer Reverb
Delay Controls
LEVEL: Volume leve of delay effect;
TIME: Delay time of delay effect;
TONE: Tone color of the delay effect;
FEEDBACK: Feedback of delay effect
Reverb Controls
LEVEL: Volume of reverb effect;
DECAY: Decay time of reverb effect;
TONE: Tone color of reverb effect;
PRE-DELAY: Pre-delay time.
Optional Routing
Whether you want basic mono or true stereo, you will get it from this pedal. Digital and true bypass circuit design reduces your signal loss.
Easy to Use
The delay and reverb are time-based effects. The Level, Time, Tone, Feedback controls of Delay; and the Mix, Decay, Tone, Pre-delay controls of Reverb are all knob-based, and separated, turn one of them to 0 will get another individual reverb/delay effect.
Tap Tempo
The Tap Tempo switch can be used as named or you can hold it down to access the “freeze” effect to stop time and enjoy your ambient creation. The built-in trail function also lets you set your effects to fade out naturally.
Trial On
Trail On will allow the effect to fade out naturally when it is switched off during playing. Power on the pedal, press and hold the Bypass switch to turn on/off the Trail function. When the Trail is on, the LED of Bypass switch will turn blue and blink after pressing.
Power Supply9V DC center negative (Please do not use power supply over 9V orincorrect polarity)