The FBT Verve 10A is loaded with high quality B&C drivers, birch ply construction, 10inch neodymium woofer + 1inch horn, 50Hz - 20KHz ( at -6dB ), bi-amped 250W LF + 100W HF, peak output 121d, 2-way, bass-reflex, bi-amplified speaker system. 1 x 10” (2 VC) B&C® neodymium woofer. 1 x 1”exit (1.4” VC) B&C® compression driver. 80°H x 50°V rotatable constant directivity horn. 250W rms Class G woofer amplifier. 100W rms Class G hf amplifier. 11-layer birch plywood scratch resistant enclosure (15mm / 0.59”).

Advanced protection circuits with dynamic equalization of the low frequencies and limiter. High S/N ratio, 24dB/oct active filters for the preamp section. Control panel with: ground-Lift, XLR input and output, 2-band equalization (High/Low), limiter and protection leds, volume control.
3 x M10 rigging points, 35mm Ø (1.38”) top-hat for speaker stand and wall bracket mount flange, metal carrying handles.

Exceptional dispersion coherence in the whole coverage angle, high SPL and accurate sound reproduction make these VERVE speakers ideal for permanent installations, live sound events, and stage monitoring applications.
Thanks to the rotatable horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100° and SPLmax/1m of 127dB.
Reduced total weight due to incorporation of neodymium components, the latest built-in power amplifier technology, switch mode power supplies and a light polypropylene horn.