Spesifikasi Alto Empire TMX160 DFX 16Channel Powered Mixer

Alto Empire TMX160 DFX 16Channel Powered Mixer

CREATE AN EXPERIENCE
Live performances are more than just a job, they are an experience for the performers, the audience and for the sound engineer. The EMPIRE TMX series was engineered to precise specifications to deliver the kind of performance you demand, while giving you everything you need to create an unforgettable experience. The EMPIRE TMX160DFX is part of the TMX line, which also includes the TMX200DFX, TMX120DFX and TMX80FX.

PROFESSIONAL CONNECTIVITY
The TMX160DFX is loaded with all the connections you need including 30 total inputs comprised of 12 XLR jacks with phantom power, 16 Line jacks and stereo RCA. These low-noise channels are your best friend when connecting instruments, mics, or even your iPod for playing between sets. Even better, each mono and stereo channel has its own 3-shelf EQ, so you can dial in every nuance you need in seconds. A/D and D/A conversion is performed with 24-bit precision, which means you'll never have a "What was that?" moment. Easy-to-view knobs with incredibly smooth movement help to make mixing feel like playing a fine instrument.

SO MANY EFFECTS, SO LITTLE TIME
The TMX160DFX's on-board Alesis digital effects processor provides pristine 24-bit, ultra-clean digital effects you, and the audience, won't soon forget. Effects include Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo,Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb + Delay and Thickener. 

POWER TO SPARE
Did we mention power? The TMX160DFX comes standard with the ability to deliver ultra-clean power at 2 x 750W (4-ohms) or 1500W (8-ohms bridged). These aren't peak rating either, this is pure continuous power. In short, it's a beast. Fortunately, all that power isn't as heavy as you might expect. Weighing in at just under 28 pounds, the TMX160DFX is a clear winner in the power-to-weight class.

Whether you need just 8 channels, a full 20 or anything in-between, the Alto Professional EMPIRE TMX series has something to help you create an unforgettable experience every time.

Specification

Input Channels 
Microphone Input: Electronically Balanced
Frequency Response: 20Hz to 20kHz, +/-1dB
Distortion (THD&N): ＜0.03% at 0 dBu, 1 kHz
Gain range 0 dB to 45 dB (Mic)
SNR (Signal-to-Noise Ratio): 115 dB

Line Input 
Electronically Balanced (Unbalanced)
Frequency Response: 20 Hz to 20 kHz, +/-1 dB
Distortion (THD&N): ＜0.03% at 0dBu, 1 kHz
Gain range: -15 dBu to 30 dBu
Impedance Microphone Input: 1.4 kOhms
Channel Insert return: 2.5 kOhms
All Other Input: 10 kOhms or Greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms

Equalization 
Hi Shelving: ±15 dB @ 12 kHz 
Mid bell:  ±12 dB @ 100 Hz ~ 8 kHz 
Low shelving: ±15 dB @ 80 Hz 
MAIN EQ 9 EQ: (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz) ±15 dB
DSP Section A/D and D/A Converters 24-bit
DSP Resolution 24-bit

Type of effects
Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo, Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb + Delay, Thickener
Presets 16
Controls 16-posistion preset selector

Clip LED
Mute Switch with Peak LED Indicator

Main Mix Section Noise: (Bus noise) Fader 0 dB, Channels muted: -90 dBr (ref.: +4 dBu)
Fader 0 dB, All input channels assigned and set to Unity Gain: -88 dBr (ref.: +4 dBu)

Power Consumption Stereo mode 
2 x 750 W @ 4 ohm (EIAJ)  2 x 520 W @ 4 ohm (RMS)

Bridge mode 
1500 W @ 8 ohm (EIAJ)

Phantom Power (Mic Pin 2 / Pin 3 and Pin 1): 47 ±2 V

Power supply Main voltage 115 V / 230 V

Dimensions (WxLxH): 565mm x 555mm x 145mm
Weight: 27.6 lb