TOKO RESMI BARANG ORIGINAL DAN BERGARANSI
1 JAM TERKIRIM *
021-6501012 / 65306112
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
The AKG C411L is a miniature condenser microphone primarily designed for capturing stringed instruments. The flat frequency and signal response is optimised to accurately reproduce the character of acoustic guitar, mandolin, violin, viola, and other stringed instruments. The microphone is easily attached near the bridge or anywhere on the instrument using the included non-marring, reusable, solvent-free adhesive compound. The low-profile lightweight design will not interfere with the balance or performance of the instrument.
Mini XLR Connection
The C411L features a 3-pin mini XLR connection that is designed to integrate with the B 29 L battery power supply, MPA III L phantom adapter and AKG WMS series bodypack transmitters.
Figure 8 Polar Pattern
The Figure 8 polar pattern accurately captures audio signal from the left and right sections of the capsule. This allows for various placement throughout the surface of the soundboard.
Adhesive Compound
The included reusable adhesive compound secures the microphone to the soundboard without marring.
Transducer | Pre-Polarized Condenser Transducer |
Polar Pattern | Figure 8 |
Frequency Response | 10Hz to 18kHz |
Dynamic Range (Typical) | not specified by manufacturer |
Signal-to-Noise Ratio | not specified by manufacturer |
Maximum Input Sound Level | 96 / 103 dB SPL |
Power Requirements | B 29 L Battery Power Supply MPA III L Power Supply Adapter AKG WMS Bodypack Transmitters |
Output Impedance | 200 ohms, unbalanced |
Output Connectors | 3-pin mini XLR |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 1 x 0.6 x 0.4" (27 x 14 x 9.5mm) |
Weight | 18g (0.6 oz) / 150g (5.3 oz) |
The AKG C411L is a miniature condenser microphone primarily designed for capturing stringed instruments. The flat frequency and signal response is optimised to accurately reproduce the character of acoustic guitar, mandolin, violin, viola, and other stringed instruments. The microphone is easily attached near the bridge or anywhere on the instrument using the included non-marring, reusable, solvent-free adhesive compound. The low-profile lightweight design will not interfere with the balance or performance of the instrument.
Mini XLR Connection
The C411L features a 3-pin mini XLR connection that is designed to integrate with the B 29 L battery power supply, MPA III L phantom adapter and AKG WMS series bodypack transmitters.
Figure 8 Polar Pattern
The Figure 8 polar pattern accurately captures audio signal from the left and right sections of the capsule. This allows for various placement throughout the surface of the soundboard.
Adhesive Compound
The included reusable adhesive compound secures the microphone to the soundboard without marring.
Transducer | Pre-Polarized Condenser Transducer |
Polar Pattern | Figure 8 |
Frequency Response | 10Hz to 18kHz |
Dynamic Range (Typical) | not specified by manufacturer |
Signal-to-Noise Ratio | not specified by manufacturer |
Maximum Input Sound Level | 96 / 103 dB SPL |
Power Requirements | B 29 L Battery Power Supply MPA III L Power Supply Adapter AKG WMS Bodypack Transmitters |
Output Impedance | 200 ohms, unbalanced |
Output Connectors | 3-pin mini XLR |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 1 x 0.6 x 0.4" (27 x 14 x 9.5mm) |
Weight | 18g (0.6 oz) / 150g (5.3 oz) |