Senin-Jumat : 09.00 - 18.00 , Sabtu : 09.00 - 15.00 wib
Hi..Selamat Datang di Galeri Musik Indonesia.com, kamu bisa Masuk atau daftar disini.
  • BELANJA AMAN

    TOKO RESMI BARANG ORIGINAL DAN BERGARANSI

  • PELAYANAN CEPAT

    1 JAM TERKIRIM *

  • HUBUNGI KAMI

    021-6501012 / 65306112

  • ALAMAT

    JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA

Keranjang Belanja
0 item(s) - Rp.0,00
Keranjang Belanja Anda kosong!
Yamaha Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante

Spesifikasi Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante

Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante

Power, Performance, and Easy System Integration
The Yamaha DZR15-D offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier and a 34Hz–20kHz frequency range, and it can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while an intuitive LCD display makes dialing in your settings a piece of cake. Built-in Dante capabilities enable smart system integration with Yamaha consoles and other Dante devices. The DZR15-D also operates effectively as a stage monitor. The DZR15-D employs a lightweight yet durable plywood cabinet with a premium-grade polyurea coating.
Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR15-D to its highest output level. D-Contour features two settings, FOH/Main and Monitor mode, allowing you to fine-tune the DZR15-D's sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR15-D remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR15-D is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful yet lightweight neodymium magnet to handle the chest-thumping low end that the DZR15-D delivers. The DZR15-D isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
 
Built-in Dante capabilities
Integrating the DZR15-D with Yamaha consoles and other Dante devices is a breeze. The DZR15-D features a built-in 2-in/2-out Dante interface, along with sample rate conversion, allowing 48kHz device compatibility. Benefit from simplified patching with Yamaha's CL/QL digital consoles from their I/O device display, while TF console users can select Quick Config for fast, easy setup. You can also combine the DZR15-D's Analog I/O with Dante I/O, supplying you with flexible routing and system configuration. Or use the Dante break-In and break-Out function to act as a simple I/O box. Beyond that, Yamaha’s ProVisionare Control software for Windows and ProVisionare Touch for iPad are also Dante compatible, giving you added remote management of your system.
 
Smart, ultra-flexible design
The Yamaha DZR15-D integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90° x 60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR15-D's constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.
 
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the DZR15-D is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR15-D can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching-mode power supply. Beyond that, this amp was optimized to match the DZR15-D's transducers, ensuring top-tier sound quality.
 
Features:
  • 2-way powered loudspeaker with 2" HF and 15" LF drivers
  • Boasts a high-power 2,000-watt Class D amplifier and 34Hz–20kHz frequency range
  • Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
  • D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
  • FOH/Main and Monitor modes allow you to fine-tune your sound based on your application
  • DSP protection safeguards your power supply, power amplifiers, and transducers against damage
  • Optimized factory presets and intuitive LCD screen make operation easy
  • Great-sounding, custom-designed transducers
  • Built-in 2-in/2-out Dante interface enables smart system integration with Yamaha consoles and other Dante devices
  • Rotatable horn allows vertical or horizontal mounting
  • 90° x 60° dispersion from a vertical position
  • Constant directivity horn supplies smooth, level coverage without roll-off
  • Universal switching-mode power supply offers maximum power, along with stable, worry-free operation
  • Lightweight yet durable plywood cabinet with a premium-grade polyurea coating
 
Specs
  • Powered: Yes
  • Power Configuration: Bi-amped
  • Channels: 2
  • LF Driver Size: 15" cone
  • HF Driver Size: 1" throat compression driver
  • LF Driver Power Amp: 1000W Class D (peak)
  • HF Driver Power Amp: 1000W Class D (peak)
  • Total Power: 2000W Class D (peak)
  • Inputs: 2 x XLR-1/4" combo
  • Outputs: 2 x XLR
  • USB: 1 x Type A
  • Other I/O: 2 x EtherCON (Dante)
  • Frequency Range: 34Hz-20khz (-10 dB)
  • Crossover Frequency: 1700 Hz
  • Maximum Peak SPL: 139 dB SPL @ 1m
  • Horizontal Coverage Angle: 90 Degrees
  • Vertical Coverage Angle: 50 Degrees
  • Signal Processing: EQ, Delay
  • Enclosure Material: Plywood
  • Mounting Options: Pole Mount with 1.37" socket, Floor Wedge, 12 x M10 Fly Points
  • Power Source: Standard IEC AC cable
  • Height: 30"
  • Width: 17.7"
  • Depth: 18.1"
  • Weight: 55.6 lbs/25 kgs
Rp.24.240.000,00 Tersedia

Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante

Merek: Yamaha
Kode Produk: DZR15D
Ketersediaan: Tersedia
Harga:
Rp.30.300.000,00 Rp.24.240.000,00

Spesifikasi Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante

Yamaha DZR15D 2000W 15 inch Powered Speaker with Dante

Power, Performance, and Easy System Integration
The Yamaha DZR15-D offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier and a 34Hz–20kHz frequency range, and it can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while an intuitive LCD display makes dialing in your settings a piece of cake. Built-in Dante capabilities enable smart system integration with Yamaha consoles and other Dante devices. The DZR15-D also operates effectively as a stage monitor. The DZR15-D employs a lightweight yet durable plywood cabinet with a premium-grade polyurea coating.
Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR15-D to its highest output level. D-Contour features two settings, FOH/Main and Monitor mode, allowing you to fine-tune the DZR15-D's sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR15-D remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR15-D is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful yet lightweight neodymium magnet to handle the chest-thumping low end that the DZR15-D delivers. The DZR15-D isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
 
Built-in Dante capabilities
Integrating the DZR15-D with Yamaha consoles and other Dante devices is a breeze. The DZR15-D features a built-in 2-in/2-out Dante interface, along with sample rate conversion, allowing 48kHz device compatibility. Benefit from simplified patching with Yamaha's CL/QL digital consoles from their I/O device display, while TF console users can select Quick Config for fast, easy setup. You can also combine the DZR15-D's Analog I/O with Dante I/O, supplying you with flexible routing and system configuration. Or use the Dante break-In and break-Out function to act as a simple I/O box. Beyond that, Yamaha’s ProVisionare Control software for Windows and ProVisionare Touch for iPad are also Dante compatible, giving you added remote management of your system.
 
Smart, ultra-flexible design
The Yamaha DZR15-D integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90° x 60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR15-D's constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.
 
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the DZR15-D is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR15-D can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching-mode power supply. Beyond that, this amp was optimized to match the DZR15-D's transducers, ensuring top-tier sound quality.
 
Features:
  • 2-way powered loudspeaker with 2" HF and 15" LF drivers
  • Boasts a high-power 2,000-watt Class D amplifier and 34Hz–20kHz frequency range
  • Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
  • D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
  • FOH/Main and Monitor modes allow you to fine-tune your sound based on your application
  • DSP protection safeguards your power supply, power amplifiers, and transducers against damage
  • Optimized factory presets and intuitive LCD screen make operation easy
  • Great-sounding, custom-designed transducers
  • Built-in 2-in/2-out Dante interface enables smart system integration with Yamaha consoles and other Dante devices
  • Rotatable horn allows vertical or horizontal mounting
  • 90° x 60° dispersion from a vertical position
  • Constant directivity horn supplies smooth, level coverage without roll-off
  • Universal switching-mode power supply offers maximum power, along with stable, worry-free operation
  • Lightweight yet durable plywood cabinet with a premium-grade polyurea coating
 
Specs
  • Powered: Yes
  • Power Configuration: Bi-amped
  • Channels: 2
  • LF Driver Size: 15" cone
  • HF Driver Size: 1" throat compression driver
  • LF Driver Power Amp: 1000W Class D (peak)
  • HF Driver Power Amp: 1000W Class D (peak)
  • Total Power: 2000W Class D (peak)
  • Inputs: 2 x XLR-1/4" combo
  • Outputs: 2 x XLR
  • USB: 1 x Type A
  • Other I/O: 2 x EtherCON (Dante)
  • Frequency Range: 34Hz-20khz (-10 dB)
  • Crossover Frequency: 1700 Hz
  • Maximum Peak SPL: 139 dB SPL @ 1m
  • Horizontal Coverage Angle: 90 Degrees
  • Vertical Coverage Angle: 50 Degrees
  • Signal Processing: EQ, Delay
  • Enclosure Material: Plywood
  • Mounting Options: Pole Mount with 1.37" socket, Floor Wedge, 12 x M10 Fly Points
  • Power Source: Standard IEC AC cable
  • Height: 30"
  • Width: 17.7"
  • Depth: 18.1"
  • Weight: 55.6 lbs/25 kgs

Tulis review

Nama Anda:



Review Anda:

Note: HTML tidak diterjemahkan!

Rating: Jelek           Bagus

Masukkan kode verifikasi berikut:





\
WA Chat
GMAPS
About Us