Alesis Strike Amp 8 MK2 2000W Drum Amplifier w/Bluetooth

Powerful Partner for Electronic Drums

The Alesis Strike Amp 8 MK2 is a high-performance bi-amped speaker specially designed for Electronic Drums. It outputs a massive 2000 watts, so you have enough headroom for almost any performance or rehearsal. The heavy duty 8” woofer and 1” high-frequency compression driver are tuned for a flat response across the spectrum to deliver the most accurate and authentic representation of acoustic and electronic drum sounds from your instrument. Strike Amp 8 MK2’s performance is exceptional, with a max 130dB SPL and a 52Hz-20kHz frequency range; wide enough to deliver the full thump of your kick drum, right up to the crystal-clear snap of your snare and hi-hats. Strike Amp 8 MK2 features two combo XLR + 1/4″ combo inputs for connecting your electronic drum kit and/or a multipad instrument, each with their own independent volume controls. You can also wirelessly connect a mobile device to the Strike Amp 8 MK2 via Bluetooth, so you can stream music wirelessly while rehearsing or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your Strike Amp out to a front of house mix.

Adapts to Any Stage or Room

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; Strike Amp 8 MK2 has a HPF EQ switch to quickly pull troublesome frequencies out and make sure your tone sits perfectly in the mix. Unwanted electrical noise can also be a common problem; Strike Amp 8 MK2’s ground lift switch can eliminate hums and buzzes resulting from ground loops. Strike Amp 8 MK2 is rugged yet lightweight and easy to transport (at 21 lbs. / 9.53 kg) making load-ins at the gig or rehearsal space easier than ever. While you can use Strike Amp 8 MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

Features

• Powerful, Professional Sound
• 2000 watts of peak power ensures you have enough headroom for almost any live performance or rehearsal
• Precision-Tuned for Electronic Drums
• The cabinet design, 8” woofer, and 1” HF compression driver are designed to deliver a full and realistic reproduction of acoustic and electronic drum sounds
• Bluetooth® Enabled
• Stream music wirelessly from your mobile device into Strike Amp 8 MK2’s dedicated Bluetooth® channel
• All the Connectivity You Need
• Two combo XLR + 1/4″ inputs with independent volume controls and an XLR direct mix output allow for chaining multiple speakers or sending your mix to front-of-house
• Quickly Adapts to Venues and Rooms
• Strike Amp 8 MK2 has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
• Lightweight, Flexible and Sturdy
• Weighing just 21 lbs. / 9.53 kg, Strike Amp MK2 is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position
•  

Specifications

• Model: STRIKE AMP 8 MK2
• Output Power: 2000 W
• Drivers: Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil.
• High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.
• Crossover Frequency: 2 kHz
• Maximum SPL: 130 dB (peak) dB-SPL @ 1 m
• Frequency Response: 62 Hz – 20 kHz (+/-3 dB)
• Frequency Range: 52 Hz – 20 kHz (-10 dB)
• Horn Coverage: 90° horizontal x 60° vertical (nominal)

Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)

1. – (1) XLR output (Link)
2. – (1) IEC power cable input

• Input Impedance: Line: 10 KΩ balanced, 20 KΩ unbalanced
• Gain/Volume Control Range: -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
• HPF Switch: 100 Hz
• Bluetooth: Version: 5.0

1. – Profile: A2DP, AVRCP
2. – Codec: SBC
3. – Range: up to 100 feet (30.5m)

Power: Connection: IEC

1. – Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
2. – Consumption: 1100W
3. – Fuse: T15AL AC250V; 220-240V T6.3AL AC250V

• Protection: Electronic clip, thermal, and transducer overdrive protection
• Mounting/Installation: Standard 36 mm pole socket
• Operating Temperature: 14°F to 113°F / -10°C to 45°C
• Dimensions (width x depth x height): 10.1” x 9.6” x 17.2” / 256 mm x 245 mm x 436 mm