Xvive U3 XLR Wireless Transmitter and Receiver for Dynamic Microphone

Spesifikasi Xvive U3 XLR Wireless Transmitter and Receiver for Dynamic Microphone

Xvive U3 XLR Wireless Transmitter and Receiver for Dynamic Microphone

The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone! The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.  The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!

If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet. The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location. Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.

The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power). Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!

Specifications

• Operates without battery or mains power
• For use with dynamic microphones and line signals
• Built-in rechargeable lithium battery
• Range: Up to 27 m / 90 ft (without obstacles)
• Frequency response: 20Hz – 20kHz
• Latency < 5 ms
• 6 Switchable channels
• 24-bit / 48 kHz A/D converter
• 2.4 GHz ISM frequency band for worldwide use
• 110 dB dynamic bandwidth
• Signal-to-noise ratio: > 110 dB
• Up to 5 hours of battery life per charge
• On button on the transmitter
• Power switch on the receiver
• Mic/Line switch to use the transmitter also for transmitting line signals for DJ and PA applications
• Channel select button
• Robust ABS housing
• Micro USB charging port
• Weight per unit: 95 g
• Colour: Black
• Incl. USB charging cable
• Note: The transmitter does not provide phantom power, use with condenser microphones is not possible​

Tulis review