FLAMMA FS06 Digital Preamp Guitar Effects Pedal

Spesifikasi FLAMMA FS06 Digital Preamp Guitar Effects Pedal

FLAMMA FS06 Digital Preamp Guitar Effects Pedal

Flamma FS06; Guitar preamp with 7 different preamp models that cover a wide variety of classic and modern guitar tones; Preamp Models: Deluxe Blue, AC31, Coral Reef, Plex 50, Blue Eye 100, MB 5th Gen, HVE 5151; Each preamp model has two channels with preset save slot for each preamp; Built-in cabinet simulation allows users to connect directly to mixer/PA system; Footswitch can be used to switch channels or to toggle pedal ON/OFF; Power consumption: 9V, 300mA

Features
Each preamp inside the FS06 features TWO channels that can be easily switched between. The built-in cabinet simulator can also be toggled on and off for when a real-life cab isn’t available and built-in EQ knobs allow easy adjustment of Bass, Mid, Treble, Gain, and Volume levels that can be saved to each channel’s preset slot. Two modes of operation are available for the footswitch, allowing it to be used as either an on/off switch or a channel selection switch.

• 7 different preamp models that cover a wide variety of classic and modern guitar tones.
• Every preamp model has two channels with a saveable preset slot for each preamp.
• Built-in cabinet simulation allows users to connect directly to mixer/PA system.
• Footswitch can be used to switch channels or to toggle pedal ON/OFF
•  

Cabinet Simulation
Built-in cabinet simulation allows users to connect directly to the mixer/PA system. Press the SAVE button and footswitch simultaneously to turn on/off the cabinet simulation. The footswitch LED will blink slowly when the cab sim is on. The LED will not blink when the cab sim is off.

Switch Channel
Switch between the two modes by pressing and holding the footswitch for just over 1 second. The footswitch LED will blink quickly, indicating the footswitch mode was toggled successfully. In on/off mode, pressing the footswitch will turn the pedal on/off. In channel mode, pressing the footswitch will change the preamp channel.

Intuitive Interface
Press SAVE/SELECT button to choose the preamp model. Indicators show the selected preamp model. Rotate the BASS, MID, TRE, LEVEL, GAIN knobs to edit the tone of the currently selected model. Press the SAVE button and footswitch simultaneously to turn on/off the cabinet simulation. Press and hold the footswitch to change between the two modes.

• Power supply 9V DC (Negative inside. Please ensure the polarity of power supply is correct. Voltage value should be 9V exactly.)
• Current Draw 300mA
• Dimension 69.82x121.5x50.65mm
• Weight 0.298KG