Spesifikasi Tascam US-1x2-HR High-Resolution USB Audio Interface

Tascam US-1x2-HR High-Resolution USB Audio Interface

When one mic input is enough
The US-1x2HR is the smallest member of the Tascam US-HR series of high-resolution USB audio interfaces. It has one mic and one instrument input and is therefore particularly suitable for simple and intuitive guitar/vocal recording with a computer. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming. Last but not least, it is a perfect solution for feeding an amplifier system with music from a computer in high quality, for example for a birthday party.

Lower noise and distortion – better sound than ever
The compact US-1x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. The lightweight interface is ideal for mobile recording and production using an iPhone or iPad* with the included Cubasis LE so you can take it to your practice room, use it to report from a live event, or capture nature sounds outdoors.

Usability is key
All US-HR models offer a unique dye-cast aluminum honeycomb structure on the side panels with a slight upward tilt. This design not only results in a sleek, eye-catching design, it also provides just the right amount of weight so the interface won’t move when cables are connected or disconnected. Equally important, the upward tilt offers the ergonomic benefit of being angled in such a way as to make the interface easy to work with.

If you need an uncluttered, easy-to-use audio interface with two inputs and two outputs, very low noise, low distortion and superb sound quality, the Tascam US-1x2HR can be your reliable partner for many years.

* An optional battery pack or AC adapter is required when used with an iPhone or iPad.

Specifications

• General

Sampling frequencies
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth
24 bits

Mic input (balanced, IN1) XLR-3-31 (1: GND, 2: HOT, 3: COLD)

Input impedance 2.4 kΩ

Nominal input level (gain knob at max.) −65 dBu (0.0004 Vrms)
Nominal input level (gain knob at min.) −8 dBu (0.0775 Vrms)
Maximum input level +10 dBu (2.449 Vrms)
Maximum gain 58 dB
Line/instrument input (balanced/unbalanced, IN2) 6.3-mm standard TRS stereo jack
 

• Analogue audio outputs

Line output L/R (unbalanced) RCA
Output impedance 100 Ω
Maximum output level +6 dBV (1.995 Vrms)
Headphones output 6.3-mm standard stereo jack
Maximum output power 18 mW + 18 mW or higher (THD+N 0.1% or less, 32 Ω)

• Other inputs and outputs

USB 4-pin USB C-type
Transfer rate USB 2.0 Hi-speed (480 Mbits/s)
Power supply (DC IN 5V) USB Micro B type

• Power supply and other specifications

Power supply 

Used with a computer USB bus power
Used with an iOS device 

• ​USB power adapter (that can supply 5 V and a current of at least 700 mA)1
• External battery pack (that can supply 5 V and a current of at least 700 mA)2

Power consumption
1.8 W
Dimensions (W × H × D, without protrusions)
146 mm × 55 mm × 120 mm
Weight
623 g
Operating temperature range
5–35 °C