Official shop,Original and Warranty.
WITHIN 1 HOUR *
021-6501012 / 65306112
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Frequency response : | 30Hz - 250Hz |
Maximum SPL : | 116dB SPL (peak @ 1m) |
Input : |
Right, left, LFE |
Outputs (towards speakers) : | Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug |
Amplification : |
350W rms, BASH® technology |
Signal internal treatment : |
Subwoofer section: Mono right/left summation |
Electric supply : |
Local supply wire: 230V (1.6A fuse) |
Visualization and control : |
Adjustable subwoofer level |
warning light : | Power on LED, Subwoofer switch (mute), Released high-pass |
Subwoofer : | 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver |
Box : | 7-1/2" (19mm) MDF panels |
Finish : |
Dark red natural veneering side panels, black body. |
Dimensions (HxWxD) : | 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm) |
Weight : | 50.7lb (23kg) |
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Frequency response : | 30Hz - 250Hz |
Maximum SPL : | 116dB SPL (peak @ 1m) |
Input : |
Right, left, LFE |
Outputs (towards speakers) : | Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug |
Amplification : |
350W rms, BASH® technology |
Signal internal treatment : |
Subwoofer section: Mono right/left summation |
Electric supply : |
Local supply wire: 230V (1.6A fuse) |
Visualization and control : |
Adjustable subwoofer level |
warning light : | Power on LED, Subwoofer switch (mute), Released high-pass |
Subwoofer : | 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver |
Box : | 7-1/2" (19mm) MDF panels |
Finish : |
Dark red natural veneering side panels, black body. |
Dimensions (HxWxD) : | 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm) |
Weight : | 50.7lb (23kg) |