Spesifikasi Digico SD9 Mixer Digital Console

Digico SD9 Mixer Digital Console

SD9: The power, finesse and clarity of DiGiCo digital mixing with Stealth Digital Processing™

• 8 x 8 Output Matrix
• Snapshot control with relative update & offline facility
• On board effects and Graphic Eq's
• Additional I/O (MADI) for open platform recording or connection to other DiGiCo consoles and racks
• 24 touch sensitive faders for instant control with Metering

SD9 : Technical Specifications

General

• Faders 24 x 100mm touch-sensitive, motorised
• Screens 1 x 15” (38cm) LCD high - resolution touch screen
• Meters 24 x 8-segment LED bargraph
• Input Channels 48 Flexi Channels Mono or Stereo
• Busses 16 Flexi Mono or Stereo busses + LR or LCR master
• Solo busses 2 stereo busses
• Matrix 12 x 8 matrix (additional to busses above)
• Control Groups 8, selectable for VCA-style, Moving fader, Mute Group
• Graphic Eq 16 x 32-band, Gain +/- 12dB
• Internal FX 8 Stereo FX processors
• Local I/O 8 x mic/line I/O, 4 x AES/EBU I/O (mono)
• MADI interface 1 x 75 ohm BNC connectivity
• D-Rack interface 2 x RJ45 shielded connectivity
• MIDI interface In / Out / Through
• VGA port DB-15 mini-female (1024 x 768 resolution)
• USB ports (3) USB2
• Light connection (2) XLR3 1.2 – 12V
• Ext Sync Word clock, MADI
• Headphone TRS unbalanced / 8-600 ohms 1/4 inch Jack
• GPI 2 x 1/4 inch Jack
• GPO 2 x 1/4 inch Jack

Physical

• Weights and Dims SD9: 36KGS. 878W 785D 262H
• Weights and Dims D-RACK: 7.4KGS. 412W 312D 179H

Audio Specifications

• Sample rate 48kHz
• Processing delay 2ms Typical (40 stereo channels, stageinput through L-R buss to stage output)
• Internal processing Up to 40-bit, floating point
• A>D & D>A 24-bit Converter Bit Depth
• Frequency response +/- 0.6dB (20Hz – 20kHz)
• THD <0.05% @ unity gain, 10dB input @ 1kHz
• Channel Separation Better than 90dB (40Hz – 15kHz)
• Residual output noise <90dBu Typical (20Hz - 20kHz)
• Microphone Input Better than -126dB Equivalent Noise
• Maximum Output +22dBu
• Maximum Input +26dBu

Processing Channel Specifications

• Input Channel
• Name User-defined / Presets
• Channel Selection Mono / Stereo
• Input Routing Main & Alternate Input
• Analogue Gain -20 to +60dB
• Phase Normal / Reverse
• Digital Trim -40 to +40dB
• Delay <1.3 sec (coarse & fine control)
• LPF 20 – 20kHz, 24dB / Oct
• HPF 20 – 20kHz, 24dB / Oct
• Insert A (pre eq/dyn) On/Off
• Insert B (post eq/dyn) On/Off
• Equalisation 4 band EQ: Parametric or Dynamic Dynamic EQ on up to 4 Flexi channels (Low/Lowshelf, lower-mid/lowshelf, upper-mid/hishelf, hi/hishelf)
  on/off
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (parametric) / 0.10-0.85 (shelf)
• Dynamic Eq on/off
  Over/under
  Band on/off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Compressor Single or Multiband (3 band) Multiband and Compression on up to 4 flexi channels on/off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50: 1
  Gain; 0 to +40dB with Autogain option
  Link; any channel / buss
  Hi crossover; 20Hz – 20kHz
  Lo crossover; 20Hz – 20kHz
• Gate on/off
  Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 - 90dB
  Key; Any source
  Key listen
  Freq/width; 20 – 20kHz
• EQ/Dyn order EQ/Dyn or Dyn/EQ
• Mute Channel mute / hard mute
• Solo Solo Buss 1 / Solo Buss 2 / Both,
• Auto solo
• Channel Safe Input, eq, dyn, aux, pan, fade/mute, inserts, buss, directs, full safe
• Output Routing Buss, Insert A, Insert B, FX
• Direct: on/off, pre-mute / pre-fade / post-fade, level +/- 18dB
• Fader 100mm motorised fader -∞ to +10dB

Processing Channel Specifications

• Aux / Group / Matrix Output
• Name User-defined / Presets
• Phase Normal / Reverse
• Digital Trim -20 to +60dB
• Delay <1.3 sec (coarse & fine control)
• LPF 20 – 20kHz, 24dB / Oct
• HPF 20 – 20kHz, 24dB / Oct
• Insert A (pre eq/dyn) On/Off
• Insert B (post eq/dyn) On/Off
• Equalisation 4 band EQ:
  Parametric or Dynamic Dynamic EQ on up to 4 Flexi Busses (low /lowshelf, lower-mid/lowshelf, upper-mid/hishelf, hi/hishelf)
  Freq; 20 – 20kHz
  Gain; +/- 18dB
  Q: 0.1 -20 (parametric) / 0.10-0.85 (shelf)
• Dynamic Eq on/off
  Over/underBand on/off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
• Compressor Single or Multiband (3 band) Multiband Compression on up to 4 Flexi Busseson/off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50: 1
  Gain; 0 to +40dB with Autogain option
  Link; any channel / buss
  Hi crossover; 20Hz – 20kHz
  Lo crossover; 20Hz – 20kHz
• Gate on/off
  Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 - 90dB
  Key; Any source
  Key listenFreq/width; 20 – 20kHz
• EQ/Dyn order EQ/Dyn or Dyn/EQ
• Mute Channel mute / hard mute
• Solo Solo Buss 1 / Solo Buss 2 / Both, Auto solo
• Channel Safe trim, eq, dyn, fade/mute, inserts, outputs, full safe
• Output Routing Outputs, Insert A, Insert B, FX
• Fader 100mm motorised fader -∞ to + 10dB