Official shop,Original and Warranty.
WITHIN 1 HOUR *
021-6501012 / 65306112
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel. The FCS-960 provides 2 channels in 3U of rack space. Constant Q-filters with filter-bypass center taps are controlled by high grade, 45mm faders with molded polymer fader knobs that eliminate visual parallax error even under low light conditions. Also included are sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs. Features
* Input Section Impedance: 10k Ohm, Electronically Balanced: Max. Input Level: +20dBu Connector: XLR331 or equivalent Output Section Output: Electronically Balanced & floating Max. Output Level: +20dBu into 600 Ohms Connector: XLR332 or equivalent System Performance Frequency Response: +/0.25dB 20Hz to 20kHz Distortion (THD): <0.005% 20Hz to 20kHz @+4dBu Output Noise (flat): <90dBu, 22Hz to 22kHz, unweighted Channel Separation: Better than 80dB from 20Hz to 20kHz Gain Control Range: +/10dB Peak Indicator: +18dBu Bypass:Passive failsafe bypass relay Filters Type: MFB Constant Q Frequencies Per Channel: 30 off, on 1/3 octave ISO centres, 25Hz to 20kHz Boost/Cut Range: Nominal +/10dB * Mode: Selectable normal or fine response High Pass Filter: 18dB/octave Butterworth, 20Hz to 250Hz General Power Requirements: AC 30VA 50/60Hz, selectable 90/120v or 190/250v. IEC AC power cord. Dimensions: 3U 19 " x 5.25" x 8.9" (482mmx132mmx227mm) Weight: 11lbs gross shipping (6kg) |
||
The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel. The FCS-960 provides 2 channels in 3U of rack space. Constant Q-filters with filter-bypass center taps are controlled by high grade, 45mm faders with molded polymer fader knobs that eliminate visual parallax error even under low light conditions. Also included are sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs. Features
* Input Section Impedance: 10k Ohm, Electronically Balanced: Max. Input Level: +20dBu Connector: XLR331 or equivalent Output Section Output: Electronically Balanced & floating Max. Output Level: +20dBu into 600 Ohms Connector: XLR332 or equivalent System Performance Frequency Response: +/0.25dB 20Hz to 20kHz Distortion (THD): <0.005% 20Hz to 20kHz @+4dBu Output Noise (flat): <90dBu, 22Hz to 22kHz, unweighted Channel Separation: Better than 80dB from 20Hz to 20kHz Gain Control Range: +/10dB Peak Indicator: +18dBu Bypass:Passive failsafe bypass relay Filters Type: MFB Constant Q Frequencies Per Channel: 30 off, on 1/3 octave ISO centres, 25Hz to 20kHz Boost/Cut Range: Nominal +/10dB * Mode: Selectable normal or fine response High Pass Filter: 18dB/octave Butterworth, 20Hz to 250Hz General Power Requirements: AC 30VA 50/60Hz, selectable 90/120v or 190/250v. IEC AC power cord. Dimensions: 3U 19 " x 5.25" x 8.9" (482mmx132mmx227mm) Weight: 11lbs gross shipping (6kg) |
||