Boss DD 3T Digital Delay Pedal

Spesifikasi Boss DD 3T Digital Delay Pedal

Boss DD 3T Digital Delay Pedal

With the DD-3T, BOSS have taken the original DD-3 pedal design and control layout, and enhanced its functionality with the inclusion of a Tap Tempo control - both on-board and via external switch.

The Iconic Digital Delay - Enhanced!

A pedalboard staple the world over since it's 1986 release, the BOSS DD-3 is a firm favourite thanks to it's awesome sound and user-friendly layout.

Do you feel it's time to replace your trusty Digital Delay pedal, but whilst you want something new you also want it to look, sound, and feel familiar? Then the new BOSS DD-3T could well be for you!

BOSS DD-3T Digital Delay Pedal Highlights

• Updated version of the industry-standard Boss DD-3 Pedal, with enhanced functionality for modern players
• Ultra-easy operation for fast sound creation
• Delay time of 12.5 to 800 ms, divided into three ranges for quick setup
• Tap in tempos with the onboard pedal switch or an external footswitch
• Short Loop setting for creating phrase loops (same as the Hold function on the original DD-3)
• Direct output for sending dry and wet sounds to separate amps
• Main and direct output jacks now positioned on one side of the pedal
• BOSS five-year warranty

A Timeless Classic

The original BOSS DD-3 has been in continuous production for more than three decades now - an incredible feat for a compact pedal.

This pedal was renowned for its warm, round delay tone and simple controls, making it the Go To delay for countless players the world over.

Well, you'll be glad to know that the DD-3T's sound circuitry and controls are identical to the original DD-3!

On-Board Tap Tempo

As delay effects have progressed over the decades, the key ingredient that seemed to be missing from the DD-3 was the inclusion of a Tap Tempo function.

Well, that's where the DD-3T comes into play. When in Delay mode, simply hold the pedal switch for two seconds to toggle between Bypass and Tap operation, before tapping out the tempo you wish.

In addition to this, you can also connect an external footswitch for setting the tempo. When the tap input is used, you will have up to 800ms of delay time available.

Direct Out

Just like the DD-3, the BOSS DD-3T features a direct output socket, which allows you to send both Wet and Dry signals to two different amplifiers.

On the DD-3T, however, this output has been moved next to the main output jack, making connections that bit easier.

Hold That Loop

Prior to the release of the increasingly popular loop station, you could achieve a similar effect with the original DD-3 and DD-2.

These pedals allowed you to capture up to 800ms of sound, play it repeatedly, and jam over the top, and you'll be glad to know that the DD-3T features the very same function!

BOSS DD-3T Digital Delay Specifications:

• Nominal Input Level: -20 dBu
• Input Impedance: 1 M ohm
• Nominal Output Level: -20 dBu
• Output Impedance: 1 k ohm
• Recommended Load Impedance: 10 k ohms or greater
• Bypass: Buffered bypass
• Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, Pedal switch
• Indicator: CHECK indicator (Used for indication of check battery)

Connectors

• INPUT jack: 1/4-inch phone type
• OUTPUT jack: 1/4-inch phone type
• DIRECT OUT jack: 1/4-inch phone type
• TEMPO jack: 1/4-inch phone type
• DC IN jack

Power Supply

• Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
• AC adaptor (PSA series: sold separately)
• Current Draw: 45 mA

Expected battery life under continuous use

• Alkaline: Approx. 11.5 hours
• Carbon: Approx. 3 hours

Dimensions

• 73 (W) x 129 (D) x 59 (H) mm
• 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches

Weight (including battery)

• 420 g
• 15 oz

Accessories

• Owner's Manual
• Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
• Alkaline battery (9 V, 6LR61)

Write a review