Official shop,Original and Warranty.
WITHIN 1 HOUR *
021-6501012 / 65306112
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
Biema APPLE series amplifiers are a cost-effective solution for demanding commercial audio applications. The amplifiers are designed to be used as standard 2 channel stereo amplifiers with RMS from 150W to 1300W. The protection circuitry employed in the design ensures the integrity of the amplifiers under overload conditions. The circuit even protects the amp when a total short circuit is applied across the output terminals. The "soft start" limiter will immediately shut down the output drive in the overload or short circuit conditions, which ensure the reliability of the amplifiers. Stylish in appearance, they are prefect to be installed in those commercial applications such as pubs, nightclubs, mobile DJS, cinemas and sporting venues.
Features
Specifications
Model |
Apple 3900 |
Output power STEREO 8 ohms |
900W + 900W |
TA 1KHz THD≤1% 4 ohms |
1350W + 1350 W |
BRIDGE 8 ohms |
2700W |
Frequency response |
10Hz-50KHz -1.5dB |
Input sensitivity |
0.77V |
Maximum input level |
21dBV/9V |
Input impedance active balanced |
20K ohm |
Signal/noise ratio a-weighted RMS |
>95dB |
Crosstalk at rated output power 8 ohm 1kHz |
> 70dB |
Damping factor f=1kHz 8 ohms |
>300 |
Slew rate internal |
30V/цs |
Protection |
SHORT CIRCUIT, LIMITER, OVER CURRENT, SOFT START, OVER HEAT |
Indicators |
POWER(BLUE) PROT(YELLOW) CLIP(RED) BR(GREEN) PAR(GREEN) |
Cooling |
SMART FAN |
Front panel controls |
LEVEL ACH, BCH POWER SWITCH |
Rear panel controls |
STEREO/BRIDGE/PARALLEL MODE SWITCH |
Connector |
XLR BALANCED INPUT, 6.35 MM BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT, PROFESSIONAL BINDING POSTS OUTPUT |
Power consumption half power 8 ohms |
<1100W |
Power supply |
AC 220V-240V/50Hz |
Product/ shipping dimensions(W×D×H) |
482x430x132 (585x560x180) mm |
N.W/G. W |
26.6 kg / 29.0 kg |
Biema APPLE series amplifiers are a cost-effective solution for demanding commercial audio applications. The amplifiers are designed to be used as standard 2 channel stereo amplifiers with RMS from 150W to 1300W. The protection circuitry employed in the design ensures the integrity of the amplifiers under overload conditions. The circuit even protects the amp when a total short circuit is applied across the output terminals. The "soft start" limiter will immediately shut down the output drive in the overload or short circuit conditions, which ensure the reliability of the amplifiers. Stylish in appearance, they are prefect to be installed in those commercial applications such as pubs, nightclubs, mobile DJS, cinemas and sporting venues.
Features
Specifications
Model |
Apple 3900 |
Output power STEREO 8 ohms |
900W + 900W |
TA 1KHz THD≤1% 4 ohms |
1350W + 1350 W |
BRIDGE 8 ohms |
2700W |
Frequency response |
10Hz-50KHz -1.5dB |
Input sensitivity |
0.77V |
Maximum input level |
21dBV/9V |
Input impedance active balanced |
20K ohm |
Signal/noise ratio a-weighted RMS |
>95dB |
Crosstalk at rated output power 8 ohm 1kHz |
> 70dB |
Damping factor f=1kHz 8 ohms |
>300 |
Slew rate internal |
30V/цs |
Protection |
SHORT CIRCUIT, LIMITER, OVER CURRENT, SOFT START, OVER HEAT |
Indicators |
POWER(BLUE) PROT(YELLOW) CLIP(RED) BR(GREEN) PAR(GREEN) |
Cooling |
SMART FAN |
Front panel controls |
LEVEL ACH, BCH POWER SWITCH |
Rear panel controls |
STEREO/BRIDGE/PARALLEL MODE SWITCH |
Connector |
XLR BALANCED INPUT, 6.35 MM BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT, PROFESSIONAL BINDING POSTS OUTPUT |
Power consumption half power 8 ohms |
<1100W |
Power supply |
AC 220V-240V/50Hz |
Product/ shipping dimensions(W×D×H) |
482x430x132 (585x560x180) mm |
N.W/G. W |
26.6 kg / 29.0 kg |