Official shop,Original and Warranty.
WITHIN 1 HOUR *
021-6501012 / 65306112
JL.SUNTER MAS BARAT 1 BLOK H.9 NO.4 JAKARTA UTARA
The TG Drum Sets offer high-performance drum microphones from the Touring Gear series. Four sets are available -TG Drum Set PRO S and M, such as TG Drum Set PRO L und XL.
The sets S and M include a durable soft bag which can be equipped with four TG D35d (toms and snare), two TG I53c (overheads), and one TG D50d (bass drum). Microphone clamps are included.
Specifications
TG D50d | |
Transducer type | Dynamic |
Operating principle | Pressure gradient |
Polar pattern | Cardioid |
Frequency response | |
Close miking (switch position LIN) | 50 - 17,000 Hz |
Close miking (switch position EQ) | 20 - 15,000 Hz |
Distant miking (switch position LIN, measured at 1 m) | 80 - 17,000 Hz |
Open circuit voltage | |
(switch positon LIN) | 2.4 mV/Pa (-52.5 dBV) ±3 dB |
(switch positon EQ) | 0.9 mV/Pa (-60.9 dBV) ±3 dB |
Nominal impedance | |
(switch position LIN) | 600 Ω |
(switch position EQ) | 200 Ω |
Load impedance | ≥ 2 kΩ |
Connection | 3-pin XLR connector, male |
Length | 104 mm |
Shaft diameter | 24 mm |
Head diameter | 41 mm |
Weight (without clamp) | 134 g |
Weight (with clamp) | 189 g |
TG D35d | |
Transducer type | Dynamic |
Operating principle | Pressure gradient |
Polar pattern | Supercardioid |
Frequency response | |
Close miking | 50 - 14,000 Hz |
Distant miking (distance 1 m) | 60 - 14,000 Hz |
Open circuit voltage | 2.2 mV/Pa (-53 dBV) ±3 dB |
Nominal impedance | 600 Ω |
Load impedance | ≥ 2 kΩ |
Connector | 3-pin XLR, male |
Dimensions | |
Length | 72 mm |
Shaft diameter | 28.5 mm |
Head diameter | 35 mm |
Weight (without clamp) | 95 g |
TG I53c | |
Transducer type | Condenser (back electret) |
Operating principle | Pressure gradient |
Polar pattern | Cardioid |
Frequency response | |
Close miking | 20 - 20,000 Hz |
Distant miking (measured at 1 m) | 35 - 20,000 Hz |
Open circuit voltage | 6.8 mV/Pa (-43.4 dBV) ±2.5 dB |
Nominal impedance | 200 Ω |
Load impedance | ≥ 1 kΩ |
Max. SPL at 24 V and 48 V phantom power | 140 dB |
S/N ratio | 61 dB [CCIR; Q-Peak] 71 dB [A; RMS] |
Equivalent SPL | 23 dB [A; RMS] 33 dB [CCIR; Q-Peak] |
Power supply | Phantom power: 12 - 48 V (recommended: 48 V) |
Power consumption | 4.7 mA |
Connection | 3-pin XLR, male |
Dimensions | 100 x 19.5 mm |
Weight (without clamp) | 36 g |
The TG Drum Sets offer high-performance drum microphones from the Touring Gear series. Four sets are available -TG Drum Set PRO S and M, such as TG Drum Set PRO L und XL.
The sets S and M include a durable soft bag which can be equipped with four TG D35d (toms and snare), two TG I53c (overheads), and one TG D50d (bass drum). Microphone clamps are included.
Specifications
TG D50d | |
Transducer type | Dynamic |
Operating principle | Pressure gradient |
Polar pattern | Cardioid |
Frequency response | |
Close miking (switch position LIN) | 50 - 17,000 Hz |
Close miking (switch position EQ) | 20 - 15,000 Hz |
Distant miking (switch position LIN, measured at 1 m) | 80 - 17,000 Hz |
Open circuit voltage | |
(switch positon LIN) | 2.4 mV/Pa (-52.5 dBV) ±3 dB |
(switch positon EQ) | 0.9 mV/Pa (-60.9 dBV) ±3 dB |
Nominal impedance | |
(switch position LIN) | 600 Ω |
(switch position EQ) | 200 Ω |
Load impedance | ≥ 2 kΩ |
Connection | 3-pin XLR connector, male |
Length | 104 mm |
Shaft diameter | 24 mm |
Head diameter | 41 mm |
Weight (without clamp) | 134 g |
Weight (with clamp) | 189 g |
TG D35d | |
Transducer type | Dynamic |
Operating principle | Pressure gradient |
Polar pattern | Supercardioid |
Frequency response | |
Close miking | 50 - 14,000 Hz |
Distant miking (distance 1 m) | 60 - 14,000 Hz |
Open circuit voltage | 2.2 mV/Pa (-53 dBV) ±3 dB |
Nominal impedance | 600 Ω |
Load impedance | ≥ 2 kΩ |
Connector | 3-pin XLR, male |
Dimensions | |
Length | 72 mm |
Shaft diameter | 28.5 mm |
Head diameter | 35 mm |
Weight (without clamp) | 95 g |
TG I53c | |
Transducer type | Condenser (back electret) |
Operating principle | Pressure gradient |
Polar pattern | Cardioid |
Frequency response | |
Close miking | 20 - 20,000 Hz |
Distant miking (measured at 1 m) | 35 - 20,000 Hz |
Open circuit voltage | 6.8 mV/Pa (-43.4 dBV) ±2.5 dB |
Nominal impedance | 200 Ω |
Load impedance | ≥ 1 kΩ |
Max. SPL at 24 V and 48 V phantom power | 140 dB |
S/N ratio | 61 dB [CCIR; Q-Peak] 71 dB [A; RMS] |
Equivalent SPL | 23 dB [A; RMS] 33 dB [CCIR; Q-Peak] |
Power supply | Phantom power: 12 - 48 V (recommended: 48 V) |
Power consumption | 4.7 mA |
Connection | 3-pin XLR, male |
Dimensions | 100 x 19.5 mm |
Weight (without clamp) | 36 g |