Audix OM2 ALL-PURPOSE PROFESSIONAL DYNAMIC VOCAL MICROPHONE
The OM2 is a dynamic vocal microphone used for a wide variety of stage, home, and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback, and the ability to handle very high SPLs without distortion.
The OM2 vocal dynamic microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz – 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.
Designed with slight bass proximity and a tailored mid-range, the OM2 hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.
Designed, assembled, and tested by Audix in the USA.
Features
Dynamic Vocal Microphone
Hyper-cardioid
Frequency range 50-16,000 Hz
Sensitivity 140 dB SPL max.
Impedance: 250 Ω
Zinc metal housing
XLR connector
Specification
Transducer TypeDynamic
Frequency Response50 Hz – 16 kHz
Polar PatternHypercardioid
Output Impedance290 ohms
Sensitivity1.6 mV / Pa @ 1k
Capsule TechnologyVLM Type B
Off-Axis Rejection>25 dB
Maximum SPL≥140 dB
Power RequirementsNone
Connector3-pin XLRm
PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Audix OM2 ALL-PURPOSE PROFESSIONAL DYNAMIC VOCAL MICROPHONE
The OM2 is a dynamic vocal microphone used for a wide variety of stage, home, and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback, and the ability to handle very high SPLs without distortion.
The OM2 vocal dynamic microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz – 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.
Designed with slight bass proximity and a tailored mid-range, the OM2 hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.
Designed, assembled, and tested by Audix in the USA.
Features
Dynamic Vocal Microphone
Hyper-cardioid
Frequency range 50-16,000 Hz
Sensitivity 140 dB SPL max.
Impedance: 250 Ω
Zinc metal housing
XLR connector
Specification
Transducer TypeDynamic
Frequency Response50 Hz – 16 kHz
Polar PatternHypercardioid
Output Impedance290 ohms
Sensitivity1.6 mV / Pa @ 1k
Capsule TechnologyVLM Type B
Off-Axis Rejection>25 dB
Maximum SPL≥140 dB
Power RequirementsNone
Connector3-pin XLRm
PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector