Electro Voice DC One Loudspeaker Controller

Spesifikasi Electro Voice DC One Loudspeaker Controller

Electro Voice DC One Loudspeaker Controller

Based on a two-in-six-out topology, the DC-One is designed primarily for users of small- to medium-sized sound systems in both mobile and installed applications.
While the unit is an all-new development based on a powerful SHARC processor, it is 100% compatible with all settings from other Electro-Voice signal processors, including the Dx38the best choice for achieving maximum performance with an EV loudspeaker system.

A large part of DC-One's development was aimed towards ensuring users can easily and fully utilize its serious digital horsepower and high-end audio performance. Though free PC-Editor software is available, the DC-One can easily be operated via the front panel. Direct access buttons, six predefined configuration modes (one being free configuration), straightforward output delay settings, and true professional metering all allow for safe operation.

DC-One's unique "front-panel-access-control" allows the user to select a personal library of accessible presets (out of 60 factory and 20 user presets). In addition, the user can determine which individual parameters in each preset are locked (e.g. factory predefined output parameters) or editable (e.g. master EQ or delay settings).

The DC-One has a 1U 19-inch chassis that is deep enough to match typical amplifier depths, a front panel USB connector for the PC-Editor, and accepts either analogue or digital (AES-EBU) input signals; a 6-dB input pad is available. The RS232 on the rear also provides eight contact closures for preset changes, or allows two units to be linked for larger systems. The PC-Editor software, as well as firmware updates allowing additional functions, will be available on www.electrovoice.com.

Specifications

• Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
• Digital Inputs 1 XLR AES/EBU (2 Ch.)
• Analog Outputs 6 XLR (Electronically Balanced)
• Nominal Input Voltage 1.23V / +4dBu
• Maximum Input Voltage 8.7V / +21dBu (Without -6dB Analog Pad Engaged)
• Nominal Output Voltage 1.23V / +4dBu
• Maximum Output Voltage 8.7V / +21dBu
• Input Impedance (balanced) 10 k?
• Output Impedance (balanced) 50 Ohms
• A/D Conversion 24-Bit Delta-Sigma
• D/A Conversion 24-Bit Delta-Sigma
• Sample Rate 48 kHz
• Data Format 24-Bit
• Internal Processing 32-Bit Floating Point
• Frequency Response 10 Hz - 22 kHz (+/- 0.5 dB)
• Dynamic Range 111 dB (unweighted, band limited 22 Hz - 22 kHz)
• THD+N < 0.01% (band limited 22 Hz - 22 kHz)
• Control Protocol Front Panel USB Connector
• Mains Voltage 100-240 VAC
• Power Consumption 25W
• Electronics Type Processor
• Weight Net 4.6 kg ( 10.14 lbs )
• Dimensions (HxWxD) 44.45 x 482.6 x 355.6 mm
• (1.75" x 19" x 14")