Drawmer LA12 Line Distribution Amplifier

Features:

• One stereo input with master gain and balance controls
• Twelve stereo outputs each with individual output level controls
• An auxiliary stereo output which follows the input gain and balance controls can be linked to the input of a second LA12 if more than twelve stereo outputs are required
• The unit will operate at system levels in the range - 20dB to + 10dB
• A maximum gain of + 20dB is available through the unit which allows a wide range of source and destination equipment to be interfaced
• All audio connections are on professional quality phono (RCA) connectors for ease of installation
• Dimensions 482mm (w) x 44mm (h) x 180mm (d)

• INPUT IMPEDANCE 22K Ohm
• INPUT GAIN Max+10dB
• OUTPUT GAIN -40dB to +10dB
• NOISE Better than-100dB
• (ref +4dBv, Gain=0dB, @ 22Hz - 22KHz)
• CROSSTALK -67dB @ 10KHz
• (Input grounded, any channel output)
• DISTORTION 0.008% @ 100Hz
• 0.015% @ 1KHz to 10KHz
• BANDWIDTH 5Hz to 25Khz -1dB
• POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 7 Watts
• FUSE RATING 32mA for 230Volt, 63mA for 115Volt
• CONFORMING TO BS EN 60127-2:1991 SHEET III
• FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt Working
• CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
• WEIGHT (incl packaging) 3.4 Kgs