Turbosound Athens TCS218B-AN 18" Front-Loaded Subwoofer

Deskripsi Produk

The TCS218B-AN is a 6,000 Watt dual 18" front loaded powered subwoofer with digital networking ideally suited for a wide range of fixed installation and portable PA applications. Designed to work individually without a controller or additional amplifi cation, the TCS218B-AN provides optimal low frequency reinforcement when used in conjunction with all TCS Series loudspeakers.

A bass reflex port design enclosure, with two high power, double suspension 18" low frequency drivers that utilize a specialised voice coil wound on both the inside and outside of the coil former for higher magnetic density, better heat dissipation, higher power handling capacity, and improved efficiency.

Output power for the TCS218B-AN is provided by means of an efficient and lightweight KLARK TEKNIK 6,000-Watt Class-D power amplifier. A sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels, and transparent limiting for clarity at high output levels – and long-term reliability.

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provides intuitive access to array, position and user EQ, control, and signal routing features. Input is via a combination balanced XLR/jack input, and an XLR output is provided for daisy-chaining more active loudspeakers or for use with another powered subwoofer.

ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi matt black paint, the cabinet is constructed from 18 mm (¾") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M10 threaded rigging points are provided and mains power input is provided via a Neutrik powerCON* connector.

Technical Specifications System Frequency response 33 Hz – 200 Hz ±3 dB 
27 Hz – 200 kHz -10 dB Nominal dispersion Half Space Maximum SPL 141 dB peak Crossover type Active Transducers 2 x 18" (460 mm) LF driver Limiter Peak and rms Amplifier Maximum output power* 6000 W Type Class-D Protection Short circuit, thermal Connectors Input/link 1 x Combo Jack/XLR 1 x XLR Sensitivity +4 dBu or +14 dBu software switchable Input impedance 40 kO balanced Maximum input level +22 dBu Ultranet input/link 2 x RJ45 Mains supply Neutrik powerCON 20A† Controls DSP Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter User DSP Functions Factory EQ presets Positioning, Sound mode Display LCD 128 x 32, blue, backlit Delay 0 - 300 ms Equalisation High and low shelving EQ 
2 x parametric EQ Limiter Zero attack input limiter Presets 20 total presets, 19 user-definable Crossover Low Pass L-R 24 dB/oct Protection Lock-out function for all settings Ultranet Digital Network Digital processing A/D conversion 24-bit, 44.1 / 48 kHz sample rate Converter type 24-bit, delta-sigma System Signal 16 channels Latency < 0.9 ms Frequency response 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range Typical 92 dB Cabling Cables Shielded CAT5 Cable length max. 246 ft / 75 m recommended Power Supply Power consumption 350 W @ 1/8 max power Voltage (fuses) USA / Canada 120 V~, 60 Hz (T 15 A H 250 V) UK / Australia / Europe 220-240 V~, 50/60 Hz (T 10 A H 250 V) Korea / China 220-240 V~, 50/60 Hz (T 10 A H 250 V) Japan 100 V~, 50/60 Hz (T 15 A H 250 V) Enclosure Dimensions (H x W x D) 710 x 1130 x 730 mm (28 x 44.5 x 28.8") Net weight 95.5 kg (210.1 lbs) Construction 18 mm (5/8") Birch plywood Finish Semi matt black paint Grille Powder Coated Perforated Steel Flying hardware M10 x 8