Deskripsi Produk
DJs, singer-songwriters, and smaller bands in need of an all-in-one PA package that sounds great and is easy to transport will appreciate the black LD Systems MAUI 11 G3, a compact column array well suited for concerts, mobile DJs, and as a public address system at weddings, corporate events, and more. The MAUI 11 G3 delivers a powerful and precise sound, thanks to the 700W RMS power (1400W peak) Class-D amplifier that's housed in the dual 8" subwoofer module. The columns are equipped with 6 x 3.5" midrange drivers and 2 x 1" tweeters, providing an even sound distribution with constant horizontal dispersion in combination with the innovative phase plug design. Additionally, the curved waveguide ahead of the tweeters carries the high frequencies evenly to the very rear audience areas.
The LD Systems' engineers fine-tuned the system to reduce harmonic distortion and interference and make the sound even more transparent, vibrant, and powerful, resulting in a highly precise reproduction of vocals and instruments across the entire 120° x 30° dispersion field. The MAUI 11 G3 is capable of cardioid subwoofer operation with the use of an additional subwoofer (separately sold). Simply press the Cardioid button to enable the onboard DSP's cardioid mode, which can lower the rear volume up to 18 dB. In addition, the ultra-durable polyurea coating of the subwoofer easily withstands even the toughest demands on the road.
Features At a Glance
- Powerful bass reproduction with 2 x 8” subwoofers
- Balanced mids thanks to 6 x 3.5” full-range speakers
- Precise and silky highs with 2 x 1“ high-frequency drivers
- Cardioid column for controlled low-mid and midrange sound dispersion
- BEM optimized HF waveguide and midrange phase plugs for homogeneous dispersion
- Optimized bass-reflex design improves bass response and reduces air flow noise
- Can be combined with an additional subwoofer for increased low end or for cardioid subwoofer setups
- Dynx DSP for distortion-free sound even at maximum volume
- AAC coding for HD Bluetooth 5.0 streaming
- Automatic setup detection for quick and easy operation
- Fast and simple assembly without stands or cables
- Rugged birch plywood subwoofer housing with durable polyurea-coating
- Lightweight, powder coated aluminum column housing
-
LD Systems MAUI 11 G3 Specs
Key Specs
- Speaker Configuration
- 1 x 3-Way Speaker Column with Subwoofer
- Number of Input Channels
- 2 (2 x Mono)
- Amplifier Power Rating
- 700 W RMS
- HF Driver
- 2 x 0.5" / 12.7 mm Horn-Loaded Tweeter
- MF Driver
- 6 x 3.5" / 88.9 mm
- Audio I/O
- 2 x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced Line Input
- 2 x XLR 3-Pin Male Balanced Line Thru
- 1 x XLR 3-Pin Male Balanced Subwoofer Output
Bluetooth
5.0
Portable PA System
Speaker Configuration
1 x 3-Way Speaker Column with Subwoofer
Number of Input Channels
2 (2 x Mono)
Amplifier Power Rating
700 W RMS
Amplifier Class
Class-D
Speakers
Enclosure Type
Bass-Reflex
HF Driver
2 x 0.5" / 12.7 mm Horn-Loaded Tweeter
HF Voice Coil
1" / 25.4 mm
MF Driver
6 x 3.5" / 88.9 mm
MF Voice Coil
0.75" / 19.05 mm
Subwoofer Driver
2 x 8" / 203.2 mm Woofer
Subwoofer Voice Coil
2" / 50.8 mm
Magnet
HF Driver:
Neodymium
MF Driver/Subwoofer:
Ferrite
Signal Processing
Input Pad
None
EQ
None
Semi-Parametric EQ
None
Effects
None
DSP
24-Bit DSP at 48 kHz
Performance
Frequency Response
39 Hz to 20 kHz
Maximum SPL
125 dB
Coverage Angle
120° H x 30° V
Protections
DC Fault, Output Limiter, Short Circuit, Thermal
Connectivity
Audio I/O
2 x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced Line Input
2 x XLR 3-Pin Male Balanced Line Thru
1 x XLR 3-Pin Male Balanced Subwoofer Output
USB
None
Mobile App Compatible
No
*As of March, 2023: Check with manufacturer for the most up-to-date compatibility
Network I/O
None
Wireless Connectivity
Bluetooth
Bluetooth
5.0
Bluetooth Profiles
A2DP
Power
AC Input Power
100 to 120 VAC, 50 / 60 Hz (T 3.15 A L 250 V)
220 to 240 VAC, 50 / 60 Hz (T 3.15 A L 250 V)
Power Consumption
300 W
AC Power I/O
1 x IEC Input
Physical
Transport Options
Subwoofer:
1 x Handle (Top)
Cooling
Convection
Construction Material
Aluminum, Plywood, Polyurethane
Environmental Protection
None
System:
80.8" / 2052 mm (Full Assembly)
Subwoofer:
23.9 x 15.9 x 12" / 607 x 403 x 305 mm
Top Speaker:
57.5 x 5.3 x 4.1" / 1460 x 135 x 103 mm
Weight
System:
67.7 lb / 30.7 kg (Full Assembly)
Subwoofer:
45.2 lb / 20.5 kg
Top Speaker:
22.5 lb / 10.2 kg