FBT Mitus 206LA Active Line Array

Deskripsi Produk

600W + 300W - 134dB SPL Active precision coverage vertical array

• 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
• 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
• Frequency response from 68Hz to 20KHz
• Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
• DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
• Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
• 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
• High impact polypropylene  gas-injected enclosure withintegrated rigging hardwareadjustable with 0° to 10°angle between cabinets at2° step
• Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage
• to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements
• Wide range of hardware accessories for flying and ground stacked configurations
• Very lightweight, only 14Kg

 

Specification

Code: 31708 Built-in amplifier LF/HF: 600/300 W RMS Built-in amplifier peak LF/HF: 1200/600 W Frequency response: 68Hz - 20KHz -6dB Low frequency woofer: 2 x 165 bobina 44 neodimio inch High frequency driver: 1 x 36 bobina 64 neodimio inch Maximum SPL cont/peak: 125/134 dB Dispersion: 100°x10° max dipendente dal n° degli elementi H x V Input impedance: 22 Kohm Crossover frequency: 1.2 KHz Ac power requirements: 640 VA Input connector: XLR con loop Power cord: 5 mm/inch Net Dimension (WxHxD): 574x220x383 mm/inch Net weight: 14 kg/lb Transport Dimension (WxHxD): 655x455x280 mm/inch Transport weight: 15.7 kg/lb